Mini-PI

De WikiRobotics
Revisión del 22:20 11 may 2013 de Hitec (Discusión | contribuciones) (Raspberry-PI)

Saltar a: navegación, buscar
Raspberry PI

Introduction

The scope of this page is to document the Mini-PI robot.

Mini-PI stands off:

  • Mini: The simplest robot: Miniskybot
  • PI: Raspberry-PI: cheapest Linux PC
The intend is to build a robot, very simple, using 3D printer, and  with the Raspeberry-PI as a main processor.

I will start writing here the steps i am following to do it. I have been so many years without building a robot, and now, i feel excited about it. During these years i have been following all Juan's publications, and i will take advantage of all of them: 3D printers, python, Skymega, ...

About me: I am living in California now, that is one of the reasons i am writing this in english, another, is because i would like to present this in my son's school. They knew about my background in robotics and they would like me to present something. They have a strong team in Lego Mindstorms... let's see what i can do!!

Raspberry-PI

The main web site of Raspberry PI is http://www.raspberrypi.org . The board was originally developed as an educational project, and has became very popular in the last year 2012. I recommend to read this note from the authors.

I bought the Raspberry-PI here: http://www.alliedelec.com/images/products/mkt/pb/rasp/rasp.aspx

There are two models A and B. In my case i bought the B because i wanted it to have Ethernet on the board. Option A is not a bad idea, for example it makes a lot of sense if you want to have Wifi, instead of having the ETH, you buy a USB-Wifi-Dongle...

http://www.raspberrypi.org/downloads http://downloads.raspberrypi.org/download.php?file=/images/raspbian/2013-02-09-wheezy-raspbian/2013-02-09-wheezy-raspbian.zip http://elinux.org/RPi_Easy_SD_Card_Setup

Autores

Licencia

Cc logo.png This work is licensed under a Creative Commons Attribution-ShareAlike 2.5 Spain License.

Noticias

  • 11/Mayo/2013: Creation of the page