MY1 modules: assembling

MY1 module assembled (click to enlarge)

Introduction

The MY1 modules consist of three aluminium parts: A, B and C and a Futaba 3003 servo. In addition, five M3 8mm-in-length bolts and nuts are needed.

Beginning: Module parts + servo + bolts + nuts (Click to enlarge)

End: Assembled MY1 module (Click to enlarge)

Assembling

Step 0: Remove the paint inside the drills (Optional)

The module parts are made of 2mm width aluminium. They have been painted in black. The inner part of the drills is also painted therefore its diameter is a little bit smaller. In order for the 3mm bolts to go smooth through the drills it is necessary to remove this paint using a rounded file.

Do it for all the holes in all the parts: A, B and C

Removing the paint of the drills of Piece B(Click to enlarge)

Removing the paint of the drills of Piece A(Click to enlarge)