Diferencia entre revisiones de «Futaba 3003: corona grande»
De WikiRobotics
(→Descarga) |
|||
| Línea 13: | Línea 13: | ||
{| {{tablabonita}} | {| {{tablabonita}} | ||
|- | |- | ||
| − | | [] | + | | [https://github.com/Obijuan/printbot_part_library/raw/master/servos/Futaba3003/Futaba3003-big-rounded-horn.fcstd Futaba3003-big-rounded-horn.fcstd] |
| Modelo 3D de la corona circular grande (Freecad) | | Modelo 3D de la corona circular grande (Freecad) | ||
|------- | |------- | ||
| − | | [] | + | | [https://github.com/Obijuan/printbot_part_library/raw/master/servos/Futaba3003/step-stl/Futaba3003-big-rounded-horn.stp Futaba3003-big-rounded-horn.stp] |
| Modelo 3D de la corona circular grande (STEP) | | Modelo 3D de la corona circular grande (STEP) | ||
|------- | |------- | ||
| − | | [] | + | | [https://github.com/Obijuan/printbot_part_library/raw/master/servos/Futaba3003/step-stl/Futaba3003-big-rounded-horn.stl Futaba3003-big-rounded-horn.stl] |
| Modelo 3D de la corona circular grande (STL) | | Modelo 3D de la corona circular grande (STL) | ||
|------- | |------- | ||
Revisión del 01:51 5 ago 2014
| Github |
|---|
Introducción
Modelo 3D de la corona circular grande del Servos Futaba 3003, hecha con Freecad 0.14
Descarga
| Futaba3003-big-rounded-horn.fcstd | Modelo 3D de la corona circular grande (Freecad) |
| Futaba3003-big-rounded-horn.stp | Modelo 3D de la corona circular grande (STEP) |
| Futaba3003-big-rounded-horn.stl | Modelo 3D de la corona circular grande (STL) |
Fotos
| Álbum de fotos |
|---|
Repositorio
Autor
Licencia
 This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Spain License.
|
Enlaces
Noticias
- 5/Agosto/2014: Publicada primera versión de esta página
